Low cost lightweight bullet FE8010-KERNEL RUBBER TECHNOLOGY Co., Ltd.

KERNEL RUBBER CATEGORY

Accelerator
● Accelerator TMTM (TS) -75 ● Accelerator TMTD-80 ● Accelerator TMTD (TT) -75 ● Accelerator TDEC-75 ● Accelerator TBzTD-75 ● Accelerator TBBS (NS) -75 ● Accelerator MBTS (DM) -75 ● Accelerator MBT (M) -80 ● Promoter DPTT (TRA) -80 ● Accelerator CBS (CZ) -80 ● Accelerator KY-8
Anti-skid agent
● Moisture resistant resin KY108
Vulcanized agent
● Vulcanizing agent IS60-75 ● Vulcanizing agent SL-150 ● Vulcanizing agent DBPH-50 ● Vulcanizing agent S-80
Surfactant
● Uniform resin ● Active agent ZnO-80 ● Active agent PEG-4000
Antifogging agent
● OK 1891 wax ● Anti fog agent CS-4060
Blowing agent
● Foaming agent OBSH-75 ● Foaming agent ACD-80 ● Foaming agent ACD-50
Coupling agent
● Coupling agent SI69-50 ● Coupling agent SI-264-50GR
Coloring agent (titanium dioxide)
● Titanium dioxide TiO2-80
EVA additive
● S26 Peel off anti slip modifier ● EVA flow additive CS12 ● EVA crosslinking agent PL500
EVA wear-resistant agent
● Wear resistant agent CS130
Rubber compound
● Transparent adhesive H02-6201 ● Shipping of mixed rubber compound
Anti frost agent
● Anti frost agent KY-15
Elastomer
● KY4050 anti shrinkage particles ● Elastic body KY65 ● Low cost lightweight bullet FE8010 ● Ultra wear-resistant grounding 5028LN ● Ultra light 2287 ● Light bullet 7025 ● Lightweight and wear-resistant rubber ● EVA foam - elastomer
Processing aids
● AT dispersant
Anti ozone cracking
● KY57 particles
Antioxidants/Antioxidants
● Antioxidant 1076 ● Antioxidant CPL ● Antioxidant SP-B ● BHT (antioxidant 264)
Climbing shoe sheet
● Continuous release of films ● White anti slip plate ● Climbing shoe sheet ● Sample colored sheet
Lightweight, low specific gravity
● Lightweight modified hollow microspheres
Transparent additive
● Antioxidant CB501 ● Anti yellowing and water-resistant agent CB101

Low cost lightweight bullet FE8010

Category: Elasticity

Main features

Good weather resistance

Good resistance to compression deformation and shrinkage

Good mechanical properties and rebound

Used in foam materials with good support

Main applications

Compression molding or injection molding, foam shoe material

Suggested usage is 30-50PHR

performance	Testing standards	Test conditions	unit	Typical values
physical property
Density	ASTM D792	23℃	g/cm3	0.96±0.02
Hardness	ASTM D2240	23℃	Shore A	80±2
Melt Index	ASTM D1238	190℃·2.16Kg	g/10min	1.2
vicat softening point	ASTM D1525		℃	125.7
Mechanical properties
Tensile Strength	ASTM D412	500mm/min	MPa	16.9
Elongation at break	ASTM D412	500mm/min	%	650
Tear Strength	ASTM D624	500mm/min	N/mm	18.7
100% Modulus	ASTM D412	500mm/min	MPa	3.2
300% Modulus	ASTM D412	500mm/min	MPa	6.7

notes

The information covered in this manual is the result of our research and experience. We provide this information in good faith and in good faith, but it does not constitute a guarantee from us under any circumstances, nor does it constitute liability for any legal action brought against any third party. Typical values are for reference only and do not serve as quality commitments

[ Previous: Elastic body KY65 ]　　 [ Next: Ultra wear-resistant grounding 5028LN ]

Related recommendations