In which fields are anti-skid agents applied?

1. Ground anti slip treatment

Clean the floor: Before use, thoroughly clean the floor to ensure that there are no oil stains, dust, or other impurities to ensure that the anti slip agent can fully adhere.

Apply anti slip agent: Apply the anti slip agent evenly on the ground using a brush or roller to ensure even coverage and avoid missing or reapplying.

Wait for drying: After application, wait for 12-24 hours for the anti slip agent to fully dry and solidify.

Clean up residues: After drying, rinse the floor with clean water to ensure that there are no residual anti slip agents.

2. Bicycle seat tube anti slip

Clean the seat tube: Ensure that the surface of the seat tube is clean, free of oil stains and dust.

Apply anti slip agent: Shake the carbon fiber anti slip agent evenly and use a sponge or brush to evenly apply it to the surface of the seat tube, being careful not to over apply.

Wait for drying: After applying, wait for the anti slip agent to dry naturally. Please refer to the product instructions for the specific time.

3. Anti slip treatment of ceramic tiles

Dilute anti slip agent: Dilute the anti slip agent with water in proportion, generally at a ratio of 1:15 (antique bricks).

Application and reaction: Apply the diluted anti slip agent evenly on the tiles and wait for 15 minutes for it to fully react.

Cleaning and testing: Rinse the floor with a fixed cleaning agent, then rinse twice with clean water, and finally test the anti slip effect.

4. Other precautions

Avoid skin contact: Wear gloves when using anti slip agents to avoid direct contact with the skin.

Professional operation: For large or complex scenes, it is recommended to have professional personnel carry out construction to ensure effectiveness and safety.

Test effect: Before large-scale use, it is recommended to test in a small area to ensure that the anti slip agent is compatible with the material and the effect is ideal.